Guide

GoDaddy DNS for Google Workspace and Microsoft 365, record by record

Every record Google or Microsoft asks for goes on the same GoDaddy screen. Here is where that screen is, what to type in each box, and the few mistakes that stop email working.

Facts checked

At GoDaddy, every record for Google Workspace or Microsoft 365 goes in the same place: sign in, open your Domain Portfolio, select the domain, select DNS, then Add New Record. You pick the record type, type @ in the Name box for your main domain, paste the value Google or Microsoft gave you, and save. GoDaddy's own guides to adding a TXT record and adding an MX record walk the same screen.

That only works when GoDaddy answers your domain's DNS. If your nameservers point at another company, such as your web host or Cloudflare, your DNS is managed there instead, and that is where the records have to go. Our free DNS lookup tells you which in a few seconds.

Adding a record at GoDaddy

The same six steps for every record on this page. Only the type, the name and the value change.

  1. Check that GoDaddy answers your DNS.

    Run your domain through our DNS lookup and read the nameserver lines. GoDaddy's own nameservers usually end in domaincontrol.com. If yours name another company, add every record below at that company instead.

  2. Open the domain's DNS page.

    Sign in to GoDaddy, open your Domain Portfolio and select the domain to open its Domain Settings, then select DNS. This is the list every record on this page goes into.

  3. Select Add New Record and pick the type.

    TXT, MX or CNAME, whichever the tables below say. To add several in one go, GoDaddy has an Add More Records button.

  4. Type @ for the main domain, never the domain itself.

    In the Name box, @ stands for your main domain. For a record on a sub name, such as _dmarc or autodiscover, type only that part. GoDaddy says not to include the domain name; adding it puts the record at a name nobody checks.

  5. Paste the value exactly and keep the default TTL.

    Paste with no spaces or quote marks around it. GoDaddy's default TTL of 1 hour is what Microsoft's tables use, and Google says your provider's default is fine.

  6. Save, then check it is public.

    Select Save. If the domain has GoDaddy's Domain Protection, it asks you to confirm who you are first. Then run the DNS lookup again: once the record shows there, Google and Microsoft can see it too.

Google Workspace records at GoDaddy

Google gives you each value in the Google Admin console. Add them in this order: verification first, the mail record once the new mailboxes are ready, then the three records that keep your mail out of spam.

RecordNameValue
Verify the domainTXT@google-site-verification= followed by your code from the Admin console
Receive mailMX, priority 1@smtp.google.com
SPFTXT@v=spf1 include:_spf.google.com ~all
DKIMTXTgoogle._domainkeyThe key starting v=DKIM1; that the Admin console generates for you
DMARCTXT_dmarcv=DMARC1; p=none; rua=mailto: followed by an address you read

Verifying the domain

In the Admin console, go to Account, Domains, Manage domains, and select Verify domain. Copy the whole value, including google-site-verification=, and add it at GoDaddy as a TXT record named @. Leave it in place until Google confirms, which Google says can take up to 72 hours. This record proves you own the domain and does not change where your email goes, so it is safe to add while your current email keeps working. If Google still refuses, the usual causes are in Google Workspace domain verification failed.

Pointing mail at Google

Google's current mail record is a single MX record: smtp.google.com at priority 1, and Google says to remove any other MX records because leftovers can stop mail working. Make this change only when the new mailboxes exist, because GoDaddy warns that changing MX records can interrupt the email already on your domain. If your domain already uses Google's older values that start with aspmx and your mail works, Google says nothing needs to change.

SPF, DKIM and DMARC

For SPF, Google's value when Workspace is your only sender is v=spf1 include:_spf.google.com ~all. If an SPF record already exists, edit it rather than adding a second, and put any other service that sends as you in the same record (Google's SPF guide).

For DKIM, wait 24 to 72 hours after Gmail is turned on. Then, in the Admin console, go to Apps, Google Workspace, Gmail, Authenticate email, and generate a new record. Add it at GoDaddy as a TXT record named google._domainkey, and only then select Start authentication (Google's DKIM guide).

Add DMARC last. Google suggests waiting 48 hours after SPF and DKIM, then starting at p=none, which only reports and blocks nothing, and tightening it once the reports show your real mail passing (Google's DMARC guide).

Microsoft 365 records at GoDaddy

Microsoft offers two routes for a GoDaddy domain, and its own GoDaddy guide describes both.

The automatic route

In the Microsoft 365 admin center, go to Settings, Domains, select the domain and choose Start setup. Select Continue, then Add DNS records, sign in to GoDaddy and select Authorize. Microsoft then adds the records itself. Microsoft offers this route when the domain is not already set up with another email provider. If your email works today somewhere else, use the manual route so you decide when mail moves.

The manual route

Add these at GoDaddy with the six steps above. The verification code and the mail address are unique to your domain, so copy them from the admin center rather than from an example.

RecordNameValue
Verify the domainTXT@MS=ms followed by the number the admin center shows you
Receive mailMX, priority 10@Your domain's own address ending in .mail.protection.outlook.com, from the admin center
Outlook setupCNAMEautodiscoverautodiscover.outlook.com
SPFTXT@v=spf1 include:spf.protection.outlook.com -all
DKIMCNAME, two recordsselector1._domainkey
selector2._domainkey
The two values the Microsoft Defender portal shows for your domain
DMARCTXT_dmarcv=DMARC1; p=none; rua=mailto: followed by an address you read

Microsoft says DNS changes typically take about 15 minutes, occasionally longer. GoDaddy's guide to adding a CNAME record covers the autodiscover and DKIM records. Microsoft's guide also lists records for Teams and for device management; add those only if you use them.

SPF, DKIM and DMARC

The SPF value above is Microsoft's for a domain that sends mail through Microsoft 365 only. Like Google, Microsoft allows one SPF record per domain, so edit an existing record rather than adding another.

DKIM is turned on in the Microsoft Defender portal, under Email authentication settings, on the DKIM tab. Select your domain and Create DKIM keys, add the two CNAME records it shows at GoDaddy, then switch on Sign messages for this domain with DKIM signatures (Microsoft's DKIM guide).

Microsoft recommends DMARC after SPF and DKIM, starting at p=none and moving to quarantine and then reject as the reports confirm your real mail passes (Microsoft's DMARC guide).

Mistakes that stop email working

Each of these is quick to avoid and slow to untangle once mail has gone missing.

  • Adding records at GoDaddy when GoDaddy does not answer the DNS. Check the nameservers first. Records added in the wrong place are never read, however carefully they were typed.
  • Typing the domain in the Name box. Use @ for the main domain and only the short part, such as _dmarc, for everything else.
  • A second SPF record. Two SPF records make SPF fail outright. Edit the one you have and keep every real sender in it.
  • Switching MX before the new mailboxes exist. Incoming mail follows the MX record once the change spreads. Verify the domain, set up the accounts, then switch.
  • Leaving the old MX records in place. Google says to remove MX records other than its own. Old ones left beside the new record can still send mail to the old place.
  • Running the automatic setup over email that works. Microsoft's automatic GoDaddy setup is meant for a domain without email elsewhere. If you are moving working email, the manual route lets you pick the moment.
  • Starting DMARC at reject. Google and Microsoft both start at p=none and tighten later, so real mail is not blocked by a setting nobody has watched yet.

Who this is for

  • Businesses whose domain and DNS are at GoDaddy, setting up Google Workspace or Microsoft 365
  • Owners moving the business off a personal address and onto email at their own domain
  • Anyone whose Google or Microsoft setup is stuck at the verify your domain step
  • Owners who want to check the SPF, DKIM and DMARC records an earlier setup left behind

When this is not the right fit

  • Domains whose nameservers point somewhere other than GoDaddy. The records are the same, but they go on that company's DNS screen instead.
  • Moving existing mailboxes with years of mail in them. The records are the easy part of that job and the order is the hard part, covered in business email migration.

What TechTruePoint can help with

Adding the records takes minutes once you know where they go. Where owners ask for help is finding out who controls the DNS, the order of the switch, and checking that mail really arrives afterwards.

Common questions

Do we have to move our domain away from GoDaddy?

No. Google Workspace and Microsoft 365 both work with a domain that stays at GoDaddy. All either one needs is a handful of records added on GoDaddy's DNS page, which is what this guide covers.

Moving the domain, or moving its DNS to another company such as Cloudflare, is a separate decision with its own reasons. Neither Google nor Microsoft asks for it.

How long until Google or Microsoft sees the new record?

Usually not long. GoDaddy says most DNS updates take effect within an hour but can take up to 48 hours to reach everywhere. Microsoft says changes typically take about 15 minutes, and Google says a new record can take up to 72 hours to be recognized.

Check rather than wait. When our free DNS lookup shows the new record, Google and Microsoft can see it too, and clicking Verify again is all that is left.

There is already an SPF record on our domain. What do we do with it?

Edit it. Do not add a second one. A domain gets one SPF record, and Microsoft is plain that more than one makes SPF fail.

If the old record lists a provider you are leaving, swap that part for the new provider's value. If another service also sends mail as your domain, such as an invoicing or newsletter tool, keep its part and add the new one beside it in the same record, which is how Google says to combine senders. Our free SPF checker shows what your record says today.

Should we use Microsoft's automatic GoDaddy setup?

If the domain has no email on it yet, it is the quickest route: Microsoft adds the records for you after you sign in to GoDaddy and approve it. Microsoft's guide offers it when the domain is not already set up with another email provider.

If your email works today somewhere else, use the manual records instead. They let you choose when the MX record goes in, and that is the record that moves your incoming mail.

Get a Quote

Rather we added the records for you?

Tell us your domain and whether you are moving to Google Workspace or Microsoft 365. We check where your DNS is answered, add every record, and test sending and receiving before we hand it back.

Call now Request a quote